| Sector | abcTourism | Tender Value | INR 9.16 Lakhs approx. | Location | West Bengal - India | Ref.No | 36648593 | Closing Date | 16 - Oct - 2019 | | | South indian counter at udayachal tourist lodge Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.depth of excavation not exceeding 1500mm Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work)with earth obtained from excavation of foundation single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. Ordinary cement concrete (mix 124) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant is codes.pakur variety. Ordinary cement concrete (mix 1 1.5 3) with graded stone chips (20 mm.nominal size) excluding shuttering and reinforcement, if any, as per relevant is codes.pakur variety. Tor steel reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Holding down bolt with nut including 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. M.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to is 226, is 808 & sp (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to is 816- 1969 & is 1995 using electrodes of approved make and brand conforming to is814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental charges. M.s. structural works in roof trusses with tubular sections conforming to is 806-1968 & is 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to is 816- 1969 & is 9595 using electrodes of approved make and brand conforming to is814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages. for trusses spanning up to 12.00 m. Supplying, fitting & fixing zn-al alloy (55% al & 45% zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, epdm washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (payment to be made on area of finished work). Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping). 300 mm lapping each way. with 0.60 mm sheet. Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm x 6 mm m.s flat bar clamps bent to design, bolts, nuts, washers etc. complete. eaves gutter made of 0.63 mm. sheets.(300mm end lapping) 300 mm. wide gutter. Supplying, fitting & fixing upvc pipes a- type and fittings conforming to is13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (spun yarn, valamoid/bitumen/mseal etc) complete. Brick work with 1st class bricks with cement morter (16) in foundation and plinth. 125 mm. thick brick work with 1st class bricks in cement mortar (14) in Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary.15 mm thick plaster(16) Supplying, fi |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|